Icom F3400D / F4400D Operation Guide - Page 172
Step 2: Turning ON the transceiver, Step 1: Entering the Programming mode
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Previous view 13 OTHERS Copying data from a transceiver DDCopying data (Continued) Master: P ortable Non-display types Step 1: Entering the Programming mode (Master) 1. Set [Selector] to Channel 16. 2. While holding down [F2] and [F3], turn ON the transceiver. Continue holding down [F2] and [F3] for about 3 seconds. ••2 beeps sound. ••The transceiver enters the Programming mode. Step 2: Turning ON the transceiver (Sub) Step 3: Copying data (Master) Push the [PTT] to start copying data to the Sub transceiver. Step 4: Complete (Master/Sub) After copying is completed, the Master and Sub transceivers automatically restart. ••The user can operate the Sub transceiver with the loaded data. [Selector] [VOL] Master: Mobile Segment types Step 1: Entering the Programming mode (Master) 1. While holding down [F2] and [F3], turn ON the transceiver. Continue holding down [F2] and [F3] for about 3 seconds. ••2 beeps sound. ••The transceiver enters the Programming mode. 2. H old down [F1] for 1 second to enter the Set mode. 3. Push [F2] or [F3] to select the "C0" screen. ••The transceiver enters the Programming mode. Step 2: Turning ON the transceiver (Sub) Step 3: Copying data (Master) Push the Power key to start copying data to the Sub transceiver. Step 4: Complete (Master/Sub) After copying is completed, the Master and Sub transceivers automatically restart. ••The user can operate the Sub transceiver with the loaded data. [PTT] [F2] [F3] F1 F2 F3 [F1] [F2] [F3] Power key 13-5