Icom F3400D / F4400D Operation Guide - Page 145
Step 4: Connecting to the data device, Transceiver, Step 5: Setting the Bluetooth, Serial Port
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Previous view 11 Bluetooth® OPERATION Pairing with a data device (Continued) Step 4: Connecting to the data device (Transceiver) Push [Up] or [Down] to select the data device to connect, then push [OK]. ••Connects to the data device. Step 6: Connection (Transceiver) 1. After the transceiver and the device connection has succeeded, "✔" is displayed beside the device's icon. 2. H old down [Back] for 1 second to return to the standby screen. ••While connected to a Bluetooth® device, " " is displayed instead of " ." Step 5: Setting the Bluetooth® Serial Port (Data device) If the Serial Port Access Authorization screen as shown below is displayed, accept it. LThe content of screen may differ, depending on the device. LSee the device's instruction manual for details. TIP: When you turn ON the transceiver, with the "Auto Connect" item is set to ON, the transceiver automatically connects to the last paired device. After connecting, " " is displayed instead of " ." (Example) 11-10