Icom F3400D / F4400D Operation Guide - Page 89
Roaming function (For the Multi-site Trunking operation), ◇ Roaming Request function
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Previous view 7 NXDN™ OPERATION Roaming function (For the Multi-site Trunking operation) The Multi-site Trunking mode enables the transceiver to move to another site, according to the preset Site list*1, in order to find a site that has a higher quality signal, or provides better services. The Roaming function is automatically activated when the transceiver goes out of the range, and does not receive the downlink signal from the repeater in the currently registered site. In this case, the transceiver displays "Searching."*2 DDRoaming Request function The Roaming Request function enables the transceiver to start or resume a Roaming scan, regardless of the error rate. Push [Roaming Request] to start or resume the Roaming scan. LEven if the Site Lock function is ON, and the transceiver is locked to the currently registered site, pushing [Roaming Request] resumes a Roaming scan. Depending on the presettings, the transceiver tries to register to the repeater that has the strongest RSSI level in the last registered site or an adjacent site. This roaming type takes more time than other roaming types. The transceiver displays "Out of Range" when the transceiver cannot register to any site after searching.*2 *1 The valid roaming areas (up to 48) are listed on the Site list. *2 Only for the Portable Ten-key and Simple key types and the Mobile LCD types. 7-17