Icom F3400D / F4400D Operation Guide - Page 84
◇ Transmitting a Stun command, ◇ Transmitting a Revive command
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Previous view 7 NXDN™ OPERATION Transmitting a call (Continued) DDTransmitting a Stun command A Stun command enables you to send a signal that will stun the target station. Portable: For the Ten-key and the Simple key types Mobile: For the LCD types (Menu > Signaling/Call > Call Menu) 1. Push [Menu] to display the Menu screen. 2. Push [Left] or [Right] to select "Signaling/Call," then push [OK]. DDTransmitting a Revive command A Revive command enables you to send a signal that will revive a stunned station. Portable: For the Ten-key and the Simple key types Mobile: For the LCD types (Menu > Signaling/Call > Call Menu) 1. Push [Menu] to display the Menu screen. 2. Push [Left] or [Right] to select "Signaling/Call," then push [OK]. 3. Push [Up] or [Down] to select "Call Menu," then push [OK]. 3. Push [Up] or [Down] to select "Call Menu," then push [OK]. 4. P ush [Up] or [Down] to select the Individual ID, then push [OK]. 4. Push [Up] or [Down] to select the Individual ID, then push [OK]. 5. Push [Up] or [Down] to select "Stun," then push [PTT] to transmit the Stun command. 5. Push [Up] or [Down] to select "Revive," then push [PTT] to transmit the Revive command. ••The target station is stunned. L"Success" is displayed after receiving an acknowledgement from the target station. L"Failed" is displayed if the target station does not send back an acknowledgement. ••The stunned station is revived. L"Success" is displayed after receiving an acknowledgement from the target station. L"Failed" is displayed if the target station does not send back an acknowledgement. 7-12