Icom F3400D / F4400D Operation Guide - Page 77
◇ Transmitting a Status message, <Menu operation>, Portable, Mobile, Call Menu, Status
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Previous view 7 NXDN™ OPERATION Transmitting a call (Continued) DDTransmitting a Status message You can transmit a preset simple message. You cannot transmit a voice signal at the same time. Portable: For the Ten-key and the Simple key types Mobile: For the LCD types (Menu > Signaling/Call > Call Menu) 1. Push [Menu] to display the Menu screen. 2. Push [Left] or [Right] to select "Signaling/Call," then push [OK]. 6. Push [Up] or [Down] to select a Status Message, then push [PTT] to transmit a Status call. 3. Push [Up] or [Down] to select "Call Menu," then push [OK]. 4. P ush [Up] or [Down] to select the Individual or Group ID, then push [OK]. L"Success" is displayed after receiving an acknowledgement from the target station. L"Failed" is displayed if the target station does not send back an acknowledgement. (Menu > Signaling/Call > Status) 1. Push [Menu] to display the Menu screen. 2. Push [Left] or [Right] to select "Signaling/Call," then push [OK]. 3. Push [Up] or [Down] to select "Status," then push [OK]. 5. Push [Up] or [Down] to select "Status," then push [OK]. 4. Push [Up] or [Down] to select a Status Message, then push [PTT] to transmit a Status call to the currently selected destination. L"Success" is displayed after receiving an acknowledgement from the target station. L"Failed" is displayed if the target station does not send back an acknowledgement. 7-5