Icom F3400D / F4400D Operation Guide - Page 113
Transmitting an MDC Message call Continued, Menu > Signaling/Call >
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Previous view 8 MDC 1200 SYSTEM OPERATION Transmitting a call (Continued) DDTransmitting an MDC Message call (Continued) Portable: For the Ten-key and the Simple key types Mobile: For the LCD type (Menu > Signaling/Call > Status) 1. Push [Menu] to display the Menu screen. 2. Push [Left] or [Right] to select "Signaling/Call," then push [OK]. ••After receiving an acknowledgement, "Success" is displayed. 3. Push [Up] or [Down] to select "Message," then push [OK]. ••When the transceiver does not receive an acknowledgement, "Failed" is displayed. 4. P ush [Up] or [Down] to select a Message. ••After transmitting the Message call, returns to the Standby screen. 5. Hold down [PTT] to transmit an MDC Message call. 8-17
8
MDC 1200 SYSTEM OPERATION
8-17
Transmitting a call (Continued)
D
Transmitting an MDC Message call (Continued)
<Menu operation>
Portable:
For the Ten-key and the Simple key types
Mobile:
For the LCD type
(Menu > Signaling/Call >
Status
)
1.
Push [Menu] to display the Menu screen.
2.
Push [Left] or [Right] to select “Signaling/Call,”
then
push [OK].
3.
Push [Up] or [Down] to select “Message,” then
push [OK].
4.
Push [Up] or [Down] to select a Message.
5.
Hold down [PTT] to transmit an MDC Message
call.
• After receiving an acknowledgement, “Success” is
displayed.
• When the transceiver does not receive an
acknowledgement, “Failed” is displayed.
• After transmitting the Message call, returns to the
Standby screen.