Icom F3400D / F4400D Operation Guide - Page 75
Transmitting a call, ◇ Transmitting an Individual call
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Previous view 7 NXDN™ OPERATION Transmitting a call NXDN operation enables you to make a call to a specific station (Individual call) or to a particular group (Group call). Other digital mode transceivers on the channel will not receive a call that does not match their Individual or Group ID and/or RAN (Radio Access Number) code. NOTE: When the handshake (repeater access) fails within the specified time period after pushing [PTT], the transceiver starts roaming. DDTransmitting an Individual call Portable: For the Ten-key and the Simple key types Mobile: For the LCD types (Menu > Signaling/Call > Call List Select) 1. Push [Menu] to display the Menu screen. 2. Push [Left] or [Right] to select "Signaling/Call," then push [OK]. 3. Push [Up] or [Down] to select "Call List Select," then push [OK]. Portable: For the Ten-key and the Simple key types Mobile: For the LCD types Using [Call List Select]: 1. Push [Call List Select] to display the "Call List Select" screen. 2. P ush [Up] or [Down] to select the Individual ID. 3. Push [PTT] to transmit an Individual call. 4. Hold down [PTT] and speak at your normal voice level. Release [PTT] to receive. Using [Individual]: 1. Push [Individual] to display the "Individual Select" screen. 4. P ush [Up] or [Down] to select the Individual station. 2. P ush [Up] or [Down] to select the Individual ID. 5. Push [PTT] to transmit an Individual call. 6. Hold down [PTT] and speak at your normal voice level. Release [PTT] to receive. 3. Push [PTT] to transmit an Individual call. 4. Hold down [PTT] and speak at your normal voice level. Release [PTT] to receive. TIP: You can display the "Individual Select" screen through the Menu screen. (Menu > Signaling/Call > Individual Select) 7-3