Icom F3400D / F4400D Operation Guide - Page 87
Receiving a call, ◇ Receiving an Individual call, ◇ Receiving a Group call
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Previous view 7 NXDN™ OPERATION Receiving a call DDReceiving an Individual call 1. When an Individual call is received: ••Mute is released. ••The Status indicator lights green. ••The calling station name (or ID) is displayed while receiving the signal.* DDReceiving a Message 1. When a Message is received: ••Beeps sound. ••The Message and the calling station or Group name (or ID) are displayed.* ••" " blinks.* ••" " may be displayed or blink, depending on the presetting.* ••Portable type transceivers may vibrate, depending on the presetting. 2. Hold down [PTT], then speak into the microphone. 3. Release [PTT] to receive. DDReceiving a Group call 1. When a Group call is received: ••Mute is released. ••The Status indicator lights green. ••The Group name and the calling station name (or ID) are displayed while receiving the signal.* LW hen an All Call is received, "All Call" is displayed.* In that case, you cannot reply to it. 2. P ush [Back] to stop the display indication. DDReceiving a Call Alert call 1. When a Call Alert call is received: ••Beeps sound. ••"Call Alert" and the calling station or Group name (or ID) are displayed may be displayed or blink, depending on the presetting.* ••Portable type transceivers may vibrate, depending on the presetting. 2. Hold down [PTT], then speak into the microphone. 3. Release [PTT] to receive. DDReceiving a Status message 1. When a Status message is received: ••Beeps sound. ••The Status message and the calling station or Group name (or ID) are displayed blinks may be displayed or blink, depending on the presetting.* ••Portable type transceivers may vibrate, depending on the presetting. 2. H old down [PTT], then speak into the microphone. 3. Release [PTT] to receive. DDReceiving a Radio Check call When a Radio check command is received, the transceiver automatically transmits an acknowledgement call. The RAN code matching may not be necessary, depending on the presetting. DDReceiving a Remote Monitor call When a Remote monitor call is received, the microphone audio is automatically transmitted for the set time period. The RAN code matching may not be necessary, depending on the presetting. 2. P ush [Back] to stop the display indication. *Only for the Portable Ten-key and Simple key types and the Mobile LCD types. 7-15