Icom F3400D / F4400D Operation Guide - Page 122
Unmounting an microSD card, IMPORTANT, <Menu operation>, Portable, Mobile, SD Format, SD Unmount
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Previous view 9 ABOUT THE microSD CARD Unmounting the microSD card Before you remove a card when the transceiver is ON, be sure to first electrically unmount it, as shown below. Otherwise the data may be corrupted or deleted. TIP: For the Portable Non-Display types and Mobile Segment types Before removing a card, be sure to turn OFF the transceiver. Portable: For the Ten-key and the Simple key types Mobile: For the LCD types (Menu > SD Card > SD Unmount) 1. Push [Menu] to display the Menu screen. 2. Push [Left] or [Right] to select "SD Card," then push [OK]. 3. Push [Up] or [Down] to select "SD Unmount," then push [OK]. ••"Are you sure?" is displayed. Formatting the microSD card Use the transceiver's built-in Format function to format all microSD cards to be used with the transceiver. This creates a special folder on the card that you need for operations like loading the data. Format all cards, including a brand new microSD card, and even preformatted cards for PCs or other uses. NOTE: Formatting a card deletes all its data. Before formatting any used card, back up its data onto your PC. (p. 9-7) IMPORTANT: Even if you format the microSD card, some data may remain in the card. When you dispose the card, be sure to physically destroy it to avoid unauthorized access to any data that remains. Portable: For the Ten-key and the Simple key types Mobile: For the LCD types (Menu > SD Card > SD Format) 1. Push [Menu] to display the Menu screen. 2. P ush [Left] or [Right] to select "SD Card," then push [OK]. 3. Push [Up] or [Down] to select "SD Format," then push [OK]. ••"Are you sure?" is displayed. 4. P ush [Left] or [Right] to select , then push [OK]. LTo cancel unmounting, select . ••After unmounting, returns to the "SD Card" screen. 5. Hold down [Back] for 1 second to return to the standby screen. 6. Remove the card from the transceiver. 4. Push [Left] or [Right] to select , then push [OK]. LTo cancel formatting, select . ••After formatting, returns to the "SD Card" screen. 5. Hold down [Back] for 1 second to return to the standby screen. 9-4