Icom F3400D / F4400D Operation Guide - Page 169
Displaying the transceiver’s firmware information, <Key operation>, Portable, Mobile
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Previous view 13 OTHERS Displaying the transceiver's firmware information You can display the transceiver firmware's information. Portable: For the Ten-key and the Simple key types Mobile: For the LCD types (Menu > Information > Firmware Info) 1. Push [Menu] to display the Menu screen. 2. Push [Left] or [Right] to select "Information," then push [OK]. Portable: For the Ten-key and the Simple key types Mobile: For the LCD types 1. Turn OFF the transceiver. 2. While holding down [P1] and [OK], turn ON the transceiver. ••The transceiver enters the Firmware Information mode. 3. Push [P1] to display the "Firmware Info" screen. 4. Push [Up] or [Down] to display the transceiver's firmware information. 5. Turn OFF the transceiver, then turn it ON again to exit the Firmware Information mode. 3. Push [Up] or [Down] to select "Firmware Info," then push [OK]. 4. P ush [Up] or [Down] to display the transceiver's firmware information. 5. Hold down [Back] for 1 second to return to the standby screen. 13-2