Icom F3400D / F4400D Operation Guide - Page 70
Sensor, Display, Man down Angle, Motion Sense, Stationary Sense, Backlight, For the Portable types
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Previous view 6 MENU SCREEN For Motion Sensitivity Sensor Man down Angle (For the Portable types) Sets the Emergency mode detection angle for the Man Down function. If the transceiver leans past the set angle for the ON Timer time period, the transceiver enters the Emergency mode, and then a countdown starts. ••Options: 45, 60, or 75 degrees Motion Sense (For the Portable types) Sets the acceleration sensor sensitivity to detect whether the user is moving or not, for the Motion Detection function. This setting is for the Motion Detection function, and it determines the acceleration threshold level to activate the Motion Detection Timer. ••Range: 1 (high sensitivity) ~ 10 (low sensitivity). LIf you set a lower level, the transceiver will enter the Emergency mode more easily. Stationary Sense (For the Portable types) Sets the acceleration sensor sensitivity to detect if the user is stationary or not for the Stationary Detection function. This setting is used for the Stationary Detection function, and it determines the acceleration threshold level to activate the Stationary Detection's ON Timer (Sec). ••Range: 1 (high sensitivity) ~ 10 (low sensitivity). LIf you set at a higher level, the transceiver will enter the Emergency mode more easily. • Sensitivity example 10 9 8 7 6 5 4 3 2 1 Sensitivity Level Display Backlight Sets the Key Backlight status. For the Portable types ••OFF: Turns the display backlight continuously OFF. ••Auto: W hen any key except [PTT] is pushed, the backlight lights for 5 seconds. ••ON: Turns the backlight continuously ON. For the Mobile types ••OFF: Turns the display backlight continuously OFF. ••Auto: T urns the backlight continuously ON with the Brightness setting level. When the Dimmer terminal of the D-Sub 25 pin or Option Connector 22 pin is activated, the backlight lights dimly with the Dimmer setting level. ••ON: Turns the backlight continuously ON with the Brightness setting level. Dimmer Sets the LCD dimmer level. ••Range: 0 (the lowest) ~ 7 (the highest) NOTE: It is recommended to be the Dimmer level lower than the Brightness level. Brightness Sets the LCD brightness level. ••Range: 0 (the lowest) ~ 7 (the highest) LCD Color Test Checks whether or not the LCD displays color correctly. LCD Mode Sets the LCD Mode. ••Day: The LCD is set to the Day mode. The Day mode is for daytime operation, and the display backlight color is set to white. ••Night: The LCD is set to the Night mode. The Night mode is for nighttime operation, and the display backlight color is set to black. For Stationary Sensitivity Desk Work Key Operation Walking (slow) Walking (fast) Running 6-16