Icom F3400D / F4400D Operation Guide - Page 17
Status indicator, Reference: R=Red, G=Green, Y=Yellow
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Previous view 2 PANEL DESCRIPTION Status indicator The Status indicator indicates the status of various parameters of the transceiver as described below. (Reference: R=Red, G=Green, Y=Yellow, M=Magenta, W=White, B=Blue) • Programming: Blinks while reading or writing data. • Programming Error: Blinks if cloning fails. • Channel Error: Blinks when you select a blank channel, or an unlocked channel. • TX low Battery 1: Blinks while detecting a low battery in the TX mode. • TX low Battery 2: Blinks while detecting a very low battery in the TX mode. • TX: Lights while transmitting. • Bell (Blink): Blinks about twice every second. • Bell (ON): Blinks about once every second. TIP: Depending on the "Bell" setting, the Status indicator blinks: ••When a call that includes a matching 2-Tone code is received. ••When a call that includes a matching 5-Tone code is received. ••When a Call Alert is received. ••When a Message is received. ••When a Status call that includes a matching status number is received. • Scan, Hunt: Blinks while scanning for a channel to search for a signal, or while hunting for a control channel. • RX: Lights while receiving a signal. • CH Access: Blinks while making a call. GGGGGGGG RGRGRGRGRGRGRGRG RYRYRYRYRYRYRYRY RRRRRRRRRRRRR R RRRRR R RRRRR R RRRRRRRRRRRRRRRR YY YY G G GGGGGGGGGGGGGGGG YYY YYY 2-9