Icom F3400D / F4400D Operation Guide - Page 50
Starting a Scan, <Key operation>, Portable, Mobile, Scan Start/Stop
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Previous view 5 SCAN OPERATION Starting a Scan A Scan checks for signals on each channel and stops when a signal is received. NOTE: Two or more channels must be preset to start a Scan. Push [Scan Start/Stop] to start a Scan. ••" " blinks. (Depending on the transceiver's version.) LWhen a signal is detected, the Scan pauses on the channel until the signal disappears, and then the Scan resumes. Portable: For the Ten-key and the Simple key types Mobile: For the LCD type (Menu > Channel/Scan > Scan Start/Stop) 1. Push [Menu] to display the Menu screen. 2. Push [Left] or [Right] to select "Channel/Scan," then push [OK]. 3. Push [Up] or [Down] to select "Scan Start/Stop," then push [OK]. 4. Push [Up] or [Down] to select "ON," then push [OK]. ••The Scan starts. LWhen a signal is detected, the Scan pauses on the channel until the signal disappears, then the Scan resumes. 5. Hold down [Back] for 1 second to return to the standby screen blinks while scanning. (Depending on the transceiver's version.) 5-2