Icom F3400D / F4400D Operation Guide - Page 85
◇ Transmitting a Kill command, ◇ Transmitting an Emergency call
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Previous view 7 NXDN™ OPERATION Transmitting a call (Continued) DDTransmitting a Kill command A Kill command enables you to send a signal that will disable the target station. Portable: For the Ten-key and the Simple key types Mobile: For the LCD types (Menu > Signaling/Call > Call Menu) 1. Push [Menu] to display the Menu screen. 2. Push [Left] or [Right] to select "Signaling/Call," then push [OK]. DDTransmitting an Emergency call An NXDN Emergency call can be transmitted in the same way as the 2-Tone, 5-Tone, or MDC 1200 signaling operation. See "Emergency call" for details. (pp. 4-3 ~ 4-6) 3. Push [Up] or [Down] to select "Call Menu," then push [OK]. 4. P ush [Up] or [Down] to select the Individual ID, then push [OK]. 5. Push [Up] or [Down] to select "Kill," then push [PTT] to transmit the Kill command. ••The target station is disabled. L"Success" is displayed after receiving an acknowledgement from the target station. L"Failed" is displayed if the target station does not send back an acknowledgement. 7-13