Icom F3400D / F4400D Operation Guide - Page 140
Step 2: Entering the Pairing mode, Step 3: Turning ON the Bluetooth
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Previous view 11 Bluetooth® OPERATION Turning ON the Bluetooth® function DDFor the Portable Non-display types and Mobile Segment types (Continued) Mobile: Step 1: Entering the Bluetooth® Set mode (Transceiver) 1. Turn OFF the transceiver. 2. While holding down [F2] and [F3], turn ON the transceiver. Continue holding down [F2] and [F3] for about 3 seconds. ••2 beeps sound. Step 2: Entering the Pairing mode (Bluetooth® device) LSee the Bluetooth® device's instruction manual for details. Step 3: Turning ON the Bluetooth® function (Transceiver) 3. After the headset has entered the Pairing mode, hold down [F1] for 1 second to enter the Set mode. 4. Push [F2] or [F3] to select "b0." 5. Push [Up] to turn ON the Bluetooth® function. ••The transceiver automatically enters the Pairing mode, and begins searching for a Bluetooth® headset. ••While searching, the status indicator quickly blinks blue. LIf the status indicator does not blink after pushing [Up], the transceiver has not entered the Bluetooth® Set mode. In that case, do steps 1 and 2 again. LIf the transceiver has been paired with a Bluetooth® headset before, the transceiver does not start searching. In that case, the transceiver and the headset are automatically connected. Step 5: Pairing with a data device (Transceiver) 1. When a data device is found, the transceiver pairs with it. ••After the transceiver and the data device pairing has succeeded, the Status indicator slowly blinks blue 3 times. In that case, connection to the data device has also succeeded. LIf the Bluetooth® connection fails, the Status indicator slowly blinks red 3 times. To search for a PC again, push [Down] to turn OFF the Bluetooth® function, then push [Up] to turn it ON again. The transceiver automatically tries to connect. 2. H old down [F1] for 1 second to exit the Set mode. 3. Turn OFF the transceiver, then turn it ON again to normally operate the transceiver. [Up] Power key F1 F2 F3 [F1] [F2] [F3] [Down] TIP: To turn OFF the Bluetooth® function, push [Down] when "b0" is selected in the Set mode. Step 4: Pairing with a headset (Transceiver) When a headset is found, the transceiver pairs with it. ••After the transceiver and the headset pairing has succeeded, the Status indicator slowly blinks blue 3 times. In that case, the connection to the headset has also succeeded. LThe transceiver searches for a headset first. After searching for a headset, the transceiver will start searching for a data device. To skip searching for a data device, push [PTT] on the headset. LIf the Bluetooth® connection fails, the Status indicator slowly blinks red 3 times. To search for a headset again, push [Down] to turn OFF the Bluetooth® function, then push [Up] to turn it ON again. 11-5