Icom F3400D / F4400D Operation Guide - Page 139
◇ For the Portable Non-display types and Mobile Segment types
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Previous view 11 Bluetooth® OPERATION Turning ON the Bluetooth® function (Continued) DDFor the Portable Non-display types and Mobile Segment types This section describes how to turn ON the Bluetooth® function and start pairing using the Portable Nondisplay types or Mobile Segment types. NOTE: For the Portable Ten-key and the Simple key types and Mobile LCD types ••To turn ON the Bluetooth® function: See page 11-3 ••To pair with a headset: See page 11-6 ••To pair with a data device: See page 11-9 Portable: Step 1: Entering the Bluetooth® Set mode (Transceiver) 1. Turn OFF the transceiver. 2. Set [Selector] to any channel other than Channel 16. 3. While holding down [F1], turn ON the transceiver. Continue holding down [F1] for about 3 seconds. ••2 beeps sound. ••The transceiver enters the Bluetooth® Set mode. Step 2: Entering the Pairing mode (Bluetooth® device) LSee the Bluetooth® device's instruction manual for details. Step 3: Turning ON the Bluetooth® function (Transceiver) After the headset has entered the Pairing mode, push [F2] to turn ON the Bluetooth® function. ••The transceiver automatically enters the Pairing mode, and begins searching for a Bluetooth® headset. ••While searching, the status indicator quickly blinks blue. LIf the status indicator does not blink after pushing [F2], the transceiver has not entered the Bluetooth® Set mode. In that case, do step 1 again. Step 4: Pairing with a headset (Transceiver) When a headset is found, the transceiver pairs with it. ••After the transceiver and the headset pairing has succeeded, the Status indicator slowly blinks blue 3 times. In that case, the connection to the headset has also succeeded. LThe transceiver searches for a headset first. After searching for a headset, the transceiver will start searching for a data device. To skip searching for a data device, push [PTT] on the headset. LIf the Bluetooth® connection fails, the Status indicator slowly blinks red 3 times. To search for a headset again, push [F3] to turn OFF the Bluetooth® function, then push [F2] to turn it ON again. Step 5: Pairing with a data device (Transceiver) 1. When a data device is found, the transceiver pairs with it. ••After the transceiver and the data device pairing has succeeded, the Status indicator slowly blinks blue 3 times. In that case, connection to the data device has also succeeded. LIf the Bluetooth® connection fails, the Status indicator slowly blinks red 3 times. To search for a data device again, push [F3] to turn OFF the Bluetooth® function, then push [F2] to turn it ON again. The transceiver automatically tries to connect. 2. T urn OFF the transceiver, then turn it ON again to exit the Bluetooth® Set mode. [VOL] [F1] [F2] [F3] TIP: To turn OFF the Bluetooth® function, push [F3] in the Bluetooth® Set mode. 11-4