Icom F3400D / F4400D Operation Guide - Page 151
Portable, Mobile, While holding down [F2] and [F3], turn ON
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Previous view 11 Bluetooth® OPERATION Resetting the installed Bluetooth® unit (Continued) DDFor the Portable Non-display types and Mobile Segment types NOTE: Before resetting, the Bluetooth® function must be turned OFF. Otherwise, resetting cannot be done. Portable: 1. Turn OFF the transceiver. 2. Set [Selector] to any channel other than Channel 16. 3. While holding down [F1], turn ON the transceiver. Continue holding down [F1] for about 3 seconds. ••2 beeps sound. ••The transceiver enters the Bluetooth® Set mode. 4. H old down [F3] for 1 second to reset the Bluetooth® unit's settings to their factory defaults. 5. Turn OFF the transceiver, then turn it ON again to exit the Bluetooth® Set mode. Mobile: 1. Turn OFF the transceiver. 2. While holding down [F2] and [F3], turn ON the transceiver. Continue holding down [F2] and [F3] for about 3 seconds. ••2 beeps sound. 3. Hold down [F1] for 1 second to enter the Set mode. 4. Push [F2] or [F3] to select "b0." 5. Hold down [Down] for 1 second to reset the Bluetooth® unit's settings to their factory defaults. 6. Hold down [F1] for 1 second to exit the Set mode. 7. Turn OFF the transceiver, then turn it ON again to normally operate the transceiver. [VOL] [Up] Power key [F1] F1 F2 F3 [F3] [F1] [F2] [F3] [Down] 11-16