Icom F3400D / F4400D Operation Guide - Page 88
◇ Receiving a Stun, Kill or Revive, ◇ Receiving an Emergency call
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Previous view 7 NXDN™ OPERATION Receiving a call (Continued) DDReceiving a Stun, Kill or Revive If a Stun or Kill command is received, the transceiver will display "SORRY"*1 and you cannot receive or transmit*2. DDReceiving an Emergency call 1. When an Emergency call is received: ••Beeps sound. ••"RX Emergency" and the calling station name (or ID) are displayed.*1 ••" " blinks.*1 When a Stun command is received, you cannot operate the transceiver until a Revive command is received or the password is input. When a Kill command is received, you cannot operate the transceiver until data programming is performed. NOTE: Depending on the presetting, the transceiver can ignore the Stun, Revive and Kill commands that are from a non-specified station. 2. W hen the Send Ack function is turned ON, the transceiver automatically transmits an acknowledgement to the calling station, if the received call type is a Group or All call. LIf the received call type is Individual, and it requests an acknowledgment be sent back, the transceiver automatically sends the acknowledgement. 3. Hold down [PTT], then speak into the microphone. 4. Turn OFF the transceiver, change the channel, or push [PTT] or a key to stop the beep and display indication. *1 Only for the Portable Ten-key and Simple key types and the Mobile LCD types. *2 Depending on the presetting, reception may be enabled. 7-16