Icom F3400D / F4400D Operation Guide - Page 163
Setting the VOX gain level, <Key operation>, Portable, Mobile, VOX Gain
View all Icom F3400D / F4400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Previous view 12 USER SETTINGS Setting the VOX gain level You can set the VOX gain level to between 1 (minimum) and 10 (maximum). Higher values make the VOX function more sensitive to your voice. Portable: For the Ten-key and the Simple key types Mobile: For the LCD types (M enu > Functions > VOX Gain) 1. Push [Menu] to display the Menu screen. 2. Push [Left] or [Right] to select "Functions," then push [OK]. 3. Push [Up] or [Down] to select "VOX Gain," then push [OK]. Portable: For the Non-display types 1. Turn OFF the transceiver. 2. Set [Selector] to Channel 16. 3. While holding down [F1] and [F2], turn ON the transceiver. Continue holding down [F1] and [F2] for about 3 seconds. ••2 beeps sound. ••The transceiver enters the VOX gain level Set mode. 4. Push [F2] to increase, or push [F3] to decrease the gain level. LThe setable range is 1 (minimum) ~ 10 (maximum). LA beep sounds after pushing [F2] or [F3]. An error beep sounds if you try to exceed the setable range. 5. Turn OFF the transceiver, then turn it ON again to exit the VOX gain level Set mode. [Selector] [VOL] [F1] [F2] [F3] 4. P ush [Up] or [Down] to set the VOX gain level, then push [OK]. LThe setable range is 1 (minimum) ~ 10 (maximum). 5. Hold down [Back] for 1 second to return to the standby screen. Mobile: For the Segment types 1. Turn OFF the transceiver. 2. While holding down [F2] and [F3], turn ON the transceiver. Continue holding down [F2] and [F3] for about 3 seconds. ••2 beeps sound. 3. Hold down [F1] for 1 second to enter the Set mode. 4. Push [F2] or [F3] to select the "A6" screen. 5. Push [Up] to increase, or push [Down] to decrease the gain level. LThe setable range is 1 (minimum) ~ 10 (maximum). LA beep sounds after pushing [Up] or [Down]. An error beep sounds if you try to exceed the setable range. 6. Hold down [F1] for 1 second again to exit the Set mode. 7. Turn OFF the transceiver, then turn it ON again to normally operate it. [Up] 12-11 F1 F2 F3 [F1] [F2] [F3] [Down] Power key