Icom IC-7200 Instruction Manual - Page 58

6 FUNCTIONS FOR TRANSMIT ■ VOX function The VOX (Voice-Operated Transmission) function uses your voice to switch between transmit and receive. This function provides an opportunity for hands-free operation or to input log entries into your computer, etc., while operating. q Push MODE to select a phone mode (SSB or AM). • When SSB mode is selected, push and hold MODE for 1 sec. to toggle between USB and LSB modes. w Push VOX to toggle the VOX function ON and OFF. • " " appears when the VOX function is ON. The VOX gain, ANTI-VOX and VOX delay can be set in VOX set mode. (See below.) D Adjusting the VOX function q Push MODE to select a phone mode (SSB or AM). • When SSB mode is selected, push and hold MODE for 1 sec. to toggle between USB and LSB modes. w Push VOX to toggle the VOX function ON and OFF. • " " appears when the VOX function is ON. e A djust the VOX functions in the VOX set mode. q Push and hold VOX for 1 sec. to enter the VOX set mode. w Rotate [M-CH] to select "VoX GAIN." e While speaking into the microphone with your normal voice level, rotate [DIAL] to the point where the transceiver is continuously transmitting. r Rotate [M-CH] to select "ANTI-Vox." t During receive, rotate [DIAL] to adjust the antiVOX gain to the point where the transceiver does not switch to transmit due to received audio from the speaker. y Rotate [M-CH] to select "VoX DELY." u Rotate [DIAL] to adjust the VOX delay for a convenient interval before returning to receive. i P ush VOX to exit the VOX set mode. and return to normal operation. MODE TS TUNER FILTER SPCH NB NR ANF METER V/M 1 1.8 A=/B 2 3.5 SPLIT 3 7 MW 4 10 M-CL 5 14 AGC 6 18 COMP271 . RIT GENE SCAN 8 24 MNF 0 50 VOX 9 28 F-INP ENT BAND P.AMP ATT M-CH/RIT SET [DIAL] [M-CH] VOX 9 28 Appears MODE TS TUNER FILTER SPCH NB NR ANF METER V/M 1 1.8 A=/B 2 3.5 SPLIT 3 7 MW 4 10 M-CL 5 14 AGC 6 18 COMP271 . RIT GENE SCAN 8 24 MNF 0 50 VOX 9 28 F-INP ENT BAND P.AMP ATT M-CH/RIT SET [DIAL] VOX Gain [M-CH] VOX 9 28 50% (default) 53