Icom IC-7200 Instruction Manual - Page 68
■ Frequency copying, ◇ Copying in memory mode
View all Icom IC-7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
7 MEMORY OPERATION ➔ ➔ ➔ ➔ ■ Frequency copying The frequency and operating mode in a memory channel can be copied to the VFO. D Copying in memory mode This is useful for copying a memory channel's contents (frequency and operating mode) to a VFO while operating in memory mode. This is useful when searching for signals around a memory channel frequency. NOTE: While operating in VFO mode, pushing and holding V/M for 1 sec. also copy the selected memory channel's contents (frequency and operating mode) to a VFO. When you have changed the frequency or operating mode in the selected memory channel: • Displayed frequency and mode are copied. • Programmed frequency and mode in the mem- ory channel are not copied, and they remain in the memory channel. q P ush V/M to select memory mode. w R otate [M-CH] to select the desired memory channel to be copied. • If the RIT control indicator lights orange, push M-CH/RIT SET . (p. 61) • Set the frequency or operating mode if required. • " " appears if the selected memory channel is a blank channel (and does not have contents). In this case copying is not possible. RIT control indicator goes out Channel increases Channel decreases e Push and hold V/M for 1 sec. to copy the frequency and operating mode. • 3 beeps are emitted when the copying is successful. • Displayed frequency and operating mode are copied. r To return to VFO mode, push V/M . • Copied frequency and operating mode appear in the display. You can return to VFO mode before copying the frequency and operating mode in step e. [EXAMPLE]: Copying contents of memory 16. Operating frequency : 14.020 MHz/CW Contents of memory 16 : 14.018 MHz/CW Rotate [M-CH] Push and hold V/M 1 1.8 for 1 sec., then push . V/M 1 1.8 63