Icom IC-7200 Instruction Manual - Page 80
Band Edge Beep, Beep Level, Beep Level Limit, RF/SQL Control, Meter Peak Hold, Set mode Continued
View all Icom IC-7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
10 SET MODE ■ Set mode (Continued) Band Edge Beep A beep sounds when an operating frequency enters or exits an amateur band. This function is independent from "Beep" (the confirmation beep) setting as above. on : Band edge beep ON oF : Band edge beep OFF The volume level can be set in "Beep Level" as below. Beep Level This item sets the maximum volume level for the confirmation beep and band edge beep tones from 0% to 100% in 1% steps. When beep tones are set to OFF, this setting has no effect. Beep Level Limit Turn the beep tones output level limiting capability ON and OFF for the confirmation and band edge beep tones. When this item is set to ON, the beep tones are linked to the [AF] control until rotation of the [AF] control reaches to the specified level-further rotation will not increase the volume of the beep tones. on : Beep level is limited with the [AF] control oF : Beep level is linked to the [AF] control RF/SQL Control The [RF/SQL] control can be set as the RF/squelch control, the squelch control only (RF gain is fixed at maximum) or Auto (RF gain control in SSB, CW and RTTY; squelch control in AM). See pgs. 4, 30 for details. rS (RF+SQL) : [RF/SQL] control is set as the RF/squelch control Sq (SQL) : [RF/SQL] control is set as the squelch control At (AUTO) : [RF/SQL] control is set as the RF gain control in SSB, CW and RTTY; squelch control in AM Meter Peak Hold This item turns the meter peak hold function ON or OFF. on : The highest activated segment of the meter remains visible for 0.5 sec. oF : The meter functions normally. 75 ON (default) 50% (default) ON (default) RF +SQL (default) ON (default)