Icom IC-7200 Instruction Manual - Page 60
■ Break-in function, ◇ Semi break-in operation
View all Icom IC-7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
6 FUNCTIONS FOR TRANSMIT ■ Break-in function The break-in function is used in CW mode to automatically switch the transceiver between transmit and receive when keying. The IC-7200 is capable of full break-in or semi break-in. Break-in operation is also referred to as QSK. D Semi break-in operation During semi break-in operation, the transceiver immediately transmits when keying, then automatically returns to receive after a pre-set delay time has passed from when you stop keying. This is similiar to VOX operation for voice. q Push MODE to select CW or CW-R mode. • When CW mode is selected, push and hold MODE for 1 sec. to toggle between CW and CW-R modes. w S et the semi break-in function ON in the set mode. q P ush and hold M-CH/RIT SET for 1 sec. twice to enter the set mode. w R otate [M-CH] to select "BK-IN" to set the CW break-in operation. e Rotate [DIAL] to select "SE." • FL : Full break-in • SE : Semi break-in • OF : Break-in OFF r R otate [M-CH] to select "BK-DELAY" to select the CW delay time when semi break-in opera- tion is selected in step e. t Rotate [DIAL] to set the desired delay time. • The delay time is selectable from 0.2 to 13.0 (dots) in 0.1 (dots) steps. y P ush M-CH/RIT SET to exit the set mode and return to normal operation. e "BK" appears on the LCD. When using a paddle, set "KEY SPD" in the quick set mode to adjust the keying speed. (p. 72) Appears MODE TS TUNER FILTER SPCH NB NR ANF METER V/M 1 1.8 A=/B 2 3.5 SPLIT 3 7 MW 4 10 M-CL 5 14 AGC 6 18 COMP271 . RIT GENE SCAN 8 24 MNF 0 50 VOX 9 28 F-INP ENT BAND P.AMP ATT M-CH/RIT SET [DIAL] [M-CH] Semi break-in operation 7.5 dots 55