Icom IC-7200 Instruction Manual - Page 81
Quick Split, Split Lock, Auto Tune - antenna tuner tuner
View all Icom IC-7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Quick Split This item turns the quick split function ON or OFF. When this item is set to ON, push and hold SPLIT for 1 sec. to set the undisplayed VFO frequency and operating mode are set the same as the displayed VFO frequency and operating mode. See pgs. 58, 59 for details. on : The quick split function ON oF : The quick split function OFF Split Lock This item turns the split lock function ON or OFF. When this item is set to ON, the transmit frequency can be adjusted by rotating [DIAL] while pushing and holding RIT * even if the lock function is activated. * The transmit frequency check function ("XFC"; as below) must be turned ON in advance. See p. 59 for split frequency operation details. NOTE: When the split lock function is ON, the transmit frequency cannot be adjusted by rotating [DIAL] while pushing and holding [PTT] even if the lock function is not activated. on : The split lock function ON oF : The split lock function OFF XFC This item turns the XFC (transmit frequency check) function ON or OFF. on : The transmit frequency can be monitored while pushing and holding RIT oF : The transmit frequency check function OFF NOTE: When the XFC function is turned ON, the RIT calculation function (p. 44) is not available. Auto Tune The optional AT-180 antenna tuner has an automatic start capability which starts tuning if the SWR is higher than 1.5:1. on : The automatic tune starts even when the tuner is turned OFF during HF bands operation. oF : The tuner remains OFF even when the SWR is poor (1.5:1) SET MODE 10 ON (default) OFF (default) OFF (default) OFF (default) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 76