Icom IC-7200 Instruction Manual - Page 64
◇ Quick split function, ◇ Split lock function, DIAL], M-CH], SPLIT LK
View all Icom IC-7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
6 FUNCTIONS FOR TRANSMIT D Quick split function When you find a DX station, an important consideration is how to set the split frequency. When you push and hold SPLIT for 1 sec., the split function is activated, and the undisplayed VFO is set the same as the displayed VFO. This shortens the time needed to start split frequency operation. Quick split operation is turned ON by default but can be turned OFF in the set mode (p. 76). The following is an example of setting 7.0620 MHz for receiving and 7.0750 MHz for transmitting. q Select VFO A. • Pushing A/B toggles VFO A and VFO B. = w Set the frequency to 7.0620 MHz and mode to LSB. (pgs. 25, 29) e Push and hold SPLIT for 1 sec. to turn the split function ON and equalize the undisplayed VFO B frequency and operating mode with the displayed VFO A. • " " appears on the LCD. r S et the XFC (transmit frequency check) function ON in the set mode. (pgs. 58, 76) • The default setting is OFF. t While pushing and holding RIT , rotate [DIAL] to set the transmit frequency to 7.0750 MHz. y Now you can receive on 7.0620 MHz and transmit on 7.0750 MHz. MODE TS TUNER FILTER SPCH [DIAL] A=/B 2 3.5 SPLIT 3 7 NB NR ANF METER V/M 1 1.8 A=/B 2 3.5 SPLIT 3 7 MW 4 10 M-CL 5 14 AGC 6 18 COMP271 RIT . GENE SCAN 8 24 MNF 0 50 VOX 9 28 F-INP ENT BAND P.AMP ATT M-CH/RIT SET [M-CH] Appears D Split lock function Accidentally releasing RIT while rotating [DIAL] changes the receive frequency. To prevent this, use both the split lock and dial lock functions to change the transmit frequency only. The split lock function cancels the dial lock function while pushing and holding RIT during split frequency operation. The dial lock's effectiveness during split frequency operation can be selected in the set mode for both receive and transmit frequencies; or only the receive frequency. (p. 76) When the split lock function is ON, the transmit frequency cannot be adjusted by rotating [DIAL] while transmitting even if the lock function is not activated. q S et the split lock function ON in the set mode. q P ush and hold M-CH/RIT SET for 1 sec. twice to enter the set mode. w R otate [M-CH] to select "SPLIT LK." e R otate [DIAL] to select ON. r P ush M-CH/RIT SET to exit the set mode and return to normal operation. w During split operation, push and hold SPCH for 1 sec. to turn the dial lock function ON. • " " appears on the LCD. e While pushing and holding RIT *, the transmit frequency and mode are indicated. And Rotate [DIAL] to set the transmit frequency. *XFC function is should be turned ON in advance. (p. 76) 59