Icom IC-7200 Instruction Manual - Page 95
Command Sub command, Description, Set/read MIC UP/DOWN keyer - tx mod
View all Icom IC-7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
CONTROL COMMAND 14 Command Sub command Description 1A 0303 Set/read Key speed level setting (0=6 wpm to 255=60 wpm) 0304 Set/read CW Pitch setting (0=300 Hz to 120=900 Hz; 5 Hz steps) 0305 Set/read CW side tone setting (0=0% to 255=100%) 0306 Set/read CW side tone level limit (0=OFF, 1=ON) 0307 Set/read Twin peak filter (0=OFF, 1=ON) 0308 Set/read RTTY mark frequency (0=1275 Hz, 1=1615 Hz, 2=2125 Hz) 0309 Set/read RTTY shift width (0=170 Hz, 1=200 Hz, 2=425 Hz, 3=850 Hz) 0310 Set/read RTTY keying polarity (0=Normal, 1=Reverse) 0311 Set/read LCD brightness (0=OFF, 1=Dark, 2=Bright) 0312 Set/read confirmation beep (0=OFF, 1=ON) 0313 Set/read band edge beep (0=OFF, 1=ON) 0314 Set/read beep gain (0=0% to 255=100%) 0315 Set/read beep gain limit (0=OFF, 1=ON) 0316 Set/read [RF/SQL] control set (0=Auto, 1=SQL, 2=RF+SQL) 0317 Set/read meter peak hold (0=OFF, 1=ON) 0318 Set/read quick split set (0=OFF, 1=ON) 0319 Set/read split lock set (0=OFF, 1=ON) 0320 Set/read transmit frequency monitor with [RIT] key set (0=OFF, 1=ON) 0321 Set/read tuner auto start set (0=OFF, 1=ON) 0322 Set/read PTT tune start set (0=OFF, 1=ON) 0323 Set/read MOD input connector during DATA OFF (0=MIC, 1=ACC, 2=MIC+ACC, 3=USB) 0324 Set/read MOD input connector during DATA ON (0=MIC, 1=ACC, 2=MIC+ACC, 3=USB) 0325 Set/read MOD input gain from USB (0=0% to 255=100%) 0326 Set/read speech level (0=0% to 255=100%) 0327 Set/read speech language (0=English, 1=Japanese) 0328 Set/read speech speed (0=Slow, 1=Fast) 0329 Set/read S-level speech (0=OFF, 1=ON) 0330 Set/read speech capability with [MODE] key operation (0=OFF, 1=ON) 0331 Set/read scan speed set (0=Slow, 1=Fast) 0332 Set/read scan resume set (0=OFF, 1=ON) Command Sub command Description 1A 0333 Set/read main dial auto TS (0=OFF, 1=Low, 2=High) 0334 Set/read 1/4 dial speed set (0=OFF, 1=ON) 0335 Set/read mic. UP/DOWN speed (0=Low, 1=High) 0336 Set/read SSB/CW synchronous tuning function (0=OFF, 1=ON) 0337 Set/read CW carrier point set (0=LSB, 1=USB) 0338 Set/read break-in set (0=OFF, 1=semi BK-IN, 2=full BK-IN) 0339 Set/read break-in delay time set (20=2.0 d to 130=13.0 d) 0340 Set/read CW keyer dot/dash ratio (28=1:1:2.8 to 45=1:1:4.5) 0341 Set/read CW paddle polarity (0=Normal, 1=Reverse) 0342 Set/read CW keyer type (0=Straight, 1=Bug-key, 2=ELEC Key) 0343 Set/read MIC UP/DOWN keyer (HM-36) set (0=OFF, 1=ON) 0344 Set/read SSB mode selectability (0=OFF: inhibition, 1=ON: selectable) 0345 Set/read CW mode selectability (0=OFF: inhibition, 1=ON: selectable) 0346 Set/read RTTY mode selectability (0=OFF: inhibition, 1=ON: selectable) 0347 Set/read AM mode selectability (0=OFF: inhibition, 1=ON: selectable) 0348 Set/read CI-V transceive set (0=OFF, 1=ON) 0349 Set/read reference frequency set (0=0% to 255=100%) 0350 Set/read noise blanker level set (0=0% to 255=100%) 0351 Set/read noise blanker width set (0=0% to 255=100%) 0352 Set/read NR level set (0=0 to 15=15) 0353 Set/read VOX gain set (0=0% to 255=100%) 0354 Set/read Anti-VOX gain set (0=0%, 255=100%) 0355 Set/read VOX delay set (0=0.0 sec. to 20=2.0 sec.) 0356 Set/read speech compressor level (0=0 to 10=10) 04 Send/read DATA mode with filter set (see next page for detail) 05 Set/read DSP filter shape (0=Sharp, 1=Soft) 06 Set/read manual notch width (0=Wide, 1=Mid., 2=Nar.) 1C 00 Set/read the transceiver's condition (0=Rx, 1=Tx) 01 Set/read antenna tuner condition (0=OFF, 1=ON, 2=Start tuning or while tuning) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 90