Icom IC-7200 Instruction Manual - Page 63
■ Split frequency operation, QUICK SPLIT FUNCTION p. 59, XFC FUNCTION p. 76, M-CH], DIAL]
View all Icom IC-7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
6 FUNCTIONS FOR TRANSMIT ■ Split frequency operation Split frequency operation allows you to transmit and receive in the same mode on two different frequencies. The split frequency operation is performed using 2 frequencies in VFO A and VFO B. The transmit and receive frequencies must be in the same band = = = = = The following is an example of setting 7.0620 MHz for receiving and 7.0750 MHz for transmitting. Keypad A=/B 2 3.5 SPLIT 3 7 MODE TS TUNER FILTER SPCH NB NR ANF METER V/M 1 1.8 A=/B 2 3.5 SPLIT 3 7 MW 4 10 M-CL 5 14 AGC 6 18 COMP271 . RIT GENE SCAN 8 24 MNF 0 50 VOX 9 28 F-INP ENT BAND P.AMP ATT M-CH/RIT SET [DIAL] [M-CH] F-INP ENT BAND q Push A/B to select VFO A. w Set the frequency to 7.0620 MHz and mode to LSB. (pgs. 25, 29) e Push SPLIT to turn the split function ON. • " " appears on the LCD. Appears r Push and hold A/B for 1 sec. to equalize the undisplayed VFO B frequency and operating mode with the displayed VFO A. t Push A/B to select the VFO B. y Set the frequency to 7.0750 MHz (LSB). (p. 25) CONVENIENT! ❍ QUICK SPLIT FUNCTION (p. 59) When you push and hold SPLIT for 1 sec., the split function is activated, and the undisplayed VFO is set the same as the displayed VFO. (This operation is same as the steps e and r as at left.) This shortens the time needed to start split frequency operation. Quick split function is turned ON by default but can be turned OFF in the set mode (p. 76). ❍ XFC FUNCTION (p. 76) When the XFC (transmit frequency check) function is ON, the transmit frequency can be changed (this operation is same as the steps t and y as at left.) NOTE: When the XFC function is ON, the RIT calculation function (p. 44) is not available. q S et the XFC (transmit frequency check) function ON in the set mode. q P ush and hold M-CH/RIT SET for 1 sec. twice to enter the set mode. w R otate [M-CH] to select "XFC." e R otate [DIAL] to select ON. r P ush M-CH/RIT SET to exit the set mode and return to normal operation. w While pushing and holding RIT , the transmit frequency is indicated. And rotate [DIAL] to set the transmit frequency. u Push A/B to return to the VFO A. i Now you can receive on 7.0620 MHz and transmit on 7.0750 MHz. To swap the transmit and receive frequencies, push A/B to exchange the VFO A and VFO B. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 58