Icom IP100H Instruction Manual ver. 2.30 - Page 112
Default: 32, Notification Beep+Vibration
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
4 ABOUT THE SETTING SCREEN 8. [Transceiver Settings] Menu ■ Transceiver Settings [Transceiver Settings]-[Transceiver Settings] < = 35 36 @ A B D E (This is only an example.) A Call type Emergency: Enable B Cancel on Reply Emergency: Enable D Cancel by Time Emergency: Enable E Alert Tone Emergency: Enable Select the call type of emergency call from Individual, Group, All, or Telephone. (Default: All) L If you select "Individual" or "Group," enter the destination ID (00001 ~ 60000). If you select "Telephone," enter a Destination Phone Number of up to 31 characters (0-9, #, and *). Select whether or not to cancel the emergency call when any RX code is received. (Default: Enable) Select whether or not to cancel the emergency call after the set period of time has passed. (Default: Disable) If you select "Enable," enter a time period to between 1 and 255 seconds. (Default: 60 (seconds)) Select whether or not to cancel the emergency call after the set period of time has passed. (Default: Enable) If you select "Enable," enter the Volume (audio level) between 0 and 32, and select the Action. (Default: 32, Notification Beep+Vibration) 4-58