Icom IP100H Instruction Manual ver. 2.30 - Page 146
IP1000C uses this default Telephone Gateway Interconnection., Default: NONE
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
4 ABOUT THE SETTING SCREEN 9. [Common Settings] Menu ■■ Profile [Common Settings]-[Profile] 27 28 29 30 31 32 33 (This is only an example.) 31 TOT Beep 32 TOT on Telephone Call�� 33 Default Telephone Gateway Interconnection 34
4
ABOUT THE SETTING SCREEN
4-92
9. [Common Settings] Menu
[Common Settings]–[Profile]
■
Profile
(This is only an example.)
;
<
=
>
C
!
"
%
#
C
TOT Beep ��������
Select whether or not the IP100H uses the TOT beep function.
(Default: Enable)
!
TOT on Telephone Call ��
Select whether or not the IP100H uses the Time-out timer on Telephone
Call.
(Default: Enable)
"
De±ault Telephone Gateway
Interconnection �����
When the IP100H make a Telephone call and the callee phone
number is not registered its Telephone Gateway Interconnection in the
[Destination Settings] screen on the [Destination Settings] menu, the
IP1000C uses this default Telephone Gateway Interconnection.
(See pp. 4-103 and 4-108)
(Default: NONE)
Selectable number or group number are only registered in the
[Destination Settings] screen on the [Destination Settings] menu.
(See pp. 4-23 and 4-25)
%
<Apply> ��������
Click to apply the entries.
#
<Reset> ��������
Click to restore the settings.
L
You cannot restore after clicking <Apply>.