Icom IP100H Instruction Manual ver. 2.30 - Page 113

4 ABOUT THE SETTING SCREEN 8. [Transceiver Settings] Menu ■■Transceiver Settings [Transceiver Settings]-[Transceiver Settings] 42 43 44 45 (This is only an example.) 42 Lone Worker Emergency: Enable 43 Lone Worker ON Timer�� Lone Worker: Enable 44 Lone Worker Reminder Timer Lone Worker: Enable 45 PTT Delay Timer Lone Worker: Enable If the Lone Worker function is activated, the Emergency function is automatically turned ON after the set period has passed with no operation. (Default: Disable) Enter the time period for starting the Lone Worker function within the range of 1 to 255 minutes (1 minute steps). (Default: 60 (minutes)) • When the IP100H is operated within the time period in this item, the times for the "Lone Worker ON Timer" (43) and "Lone Worker Reminder Timer" (44) are reset. Enter the time period to start the emergency call transmission within the range of 1 to 255 seconds (1 second steps). (Default: 60 (seconds)) LLThe emergency call is transmitted after this set period has passed from when the Emergency function is activated by the Lone Worker function. LLWhen the Lone Worker Reminder Timer is activated, beeps sound every 2 seconds until the timer is reset. Enter the time period for the delay time to transmit by pushing [PTT] while the Lone Worker On Timer and the Lone Worker Reminder Timer are activated. Enter the range of 1 to 255 ×100 millisecond (100 millisecond steps).  (Default: 10 (×100 milliseconds)) LLIf this item is set to a longer period of time, you can reset the Lone Worker On Timer and Lone Worker Reminder Timer by momentary pushing [PTT] without transmitting. LLHold down [PTT] for more than the set time period in this item to transmit. 4-59