Icom IP100H Instruction Manual ver. 2.30 - Page 89
IP100H or IP100FS. UDP port, message or Receive notification tone settings.
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
4 ABOUT THE SETTING SCREEN 8. [Transceiver Settings] Menu ■■Transceiver Settings [Transceiver Settings]-[Transceiver Registration] 1 2 3 4 5 6 7 8 (This is only an example.) 7 Server Port Number ��� 8 Profile 9
4
ABOUT THE SETTING SCREEN
4-35
8. [Transceiver Settings] Menu
[Transceiver Settings]–[Transceiver Registration]
■
Transceiver Settings
1
2
3
4
5
6
7
8
9
*
(This is only an example.)
7
Server Port Number ���
Enter the port number that the IP1000C uses to communicate with the
IP100H or IP100FS. (UDP port)
In±ormation
L
• The set port number (RTP) and the port number +1 (RTCP) are used for the
communication.
• We recommend to use default port number, if it is not problem.
• The default number differs, depending on the [TRX No.] as shown below.
(Default: TRX No. 1 (30000), TRX No. 2 (30002), TRX No. 3 (30004),
TRX No. 4 (30006),
..............................
, TRX No. 100 (30198))
• Setting range: Even numbers between 2 and 65534.
(Some numbers may not be acceptable.)
• Do not set the port number which has already been used by another
connection setting.
8
Pro±ile ���������
Select the Profile number that the IP100H or IP100FS belongs to.
(Default: 1)
L
1 to 100 are selectable.
L
Set the Profile setting in the [Common Settings] menu, such as ID list,
message or Receive notification tone settings.
9
<Add> ���������
Click to add the entries.
*
<Reset> ��������
Click to restore the settings.
L
You cannot restore after clicking <Add>.