Icom IP100H Instruction Manual ver. 2.30 - Page 87
the IP1000C., Transceiver Management
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
4 ABOUT THE SETTING SCREEN 8. [Transceiver Settings] Menu ■■Transceiver Management 1 [Transceiver Settings]-[Transceiver Management] 7 2 3 4 5 6 8 9 10 (This is only an example.) LLAn IP100H is displayed in bold when the setting is changed and the reboot is required. 5 Talkgroup Displays the Talkgroup IDs that are selected by the IP100Hs or IP100FSs. LLWhile the IP100H or IP100FS does not select the Talkgroup, or "Registration Status" displays "Disconnected," "-" is displayed. 6 Location Displays the BSSIDs of the wireless access points that the IP100Hs are connected to. LLWhile the "Registration Status" displays "Disconnected," "-" is displayed. 7
4
ABOUT THE SETTING SCREEN
4-33
1
2
3
4
5
6
7
8
9
*
(This is only an example.)
L
An IP100H is displayed in bold when the setting is changed and the reboot is required.
8. [Transceiver Settings] Menu
[Transceiver Settings]–[Transceiver Management]
■
Transceiver Management
5
Talkgroup ��������
Displays the Talkgroup IDs that are selected by the IP100Hs or
IP100FSs.
L
While the IP100H or IP100FS does not select the Talkgroup, or “Registration
Status” displays “Disconnected,” “–” is displayed.
6
Location ��������
Displays the BSSIDs of the wireless access points that the IP100Hs are
connected to.
L
While the “Registration Status” displays “Disconnected,” “–” is displayed.
7
<Re±resh> �������
Click the <Refresh> button to renew [Registration Status].
8
Version ���������
Displays the version of the IP100Hs or IP100FSs that are registered to
the IP1000C.
L
While the “Registration Status” displays “Disconnected,” “–” is displayed.
9
Manual Update �����
Select “Enable” to manually update the IP100H firmware when the
IP1000C sends the reboot command (
*
) to the IP100H.
When the IP100H is ready to update the firmware, “F” blinks on the
display and then the IP100H automatically reboots and starts the
firmware update.
L
When the IP100H has failed preparation of firmware update, the IP100H
does not reboot automatically. If necessary, send reboot command to the
IP100H.
*
Manual Reboot �����
Click the <Execute> button to reboot all of the IP100Hs that are
selected in the selection box (
1
).
1/24
16:57
Sales8
F
Blinks
Updating