Icom IP100H Instruction Manual ver. 2.30 - Page 74
Priority Level, Service Type, Set the DSCP Differentiated Services Code Point code between 0
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
4 ABOUT THE SETTING SCREEN 5. [RoIP Settings] Menu ■■VoIP Extension TOS Type: Not used 1 2 3 [RoIP Settings]-[VoIP Extension] 56 TOS Type: TOS 1 2 3 4 56 TOS Type: Diffserv 1 2 3 4 56 (These are examples when the "Receive Buffer Type" item is set to "Static.") 4 Media (RTP Select the Priority level and Service type of the sent VoIP packets. ••Priority Level Set the TOS priority level between 0 to 7 in decimal. (Default: 7) ••Service Type Set the TOS service type code between 0 to 15 in decimal.(Default: 0) •• DSCP Set the DSCP (Differentiated Services Code Point) code between 0 to 63 in decimal. (Default: 56) 5
4
ABOUT THE SETTING SCREEN
4-20
5. [RoIP Settings] Menu
[RoIP Settings]–[VoIP Extension]
■
VoIP Extension
TOS Type: Not used
TOS Type: TOS
TOS Type: Diffserv
1
5
5
5
6
6
6
1
1
2
2
2
3
3
3
4
4
(These are examples when the “Receive Buffer Type” item is set to “Static.”)
4
Media (RTP) �������
Select the Priority level and Service type of the sent VoIP packets.
•
Priority Level
Set the TOS priority level between 0 to 7 in decimal.
(Default: 7)
•
Service Type
Set the TOS service type code between 0 to 15 in decimal. (Default: 0)
•
DSCP
Set the DSCP (Differentiated Services Code Point) code between 0 to
63 in
decimal. (Default: 56)
5
<Apply> ��������
Click to apply the entries.
6
<Reset> ��������
Click to restore the settings.
L
You cannot restore after clicking <Apply>.