Icom IP100H Instruction Manual ver. 2.30 - Page 68
Static DHCP, Static DHCP Table
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
4 ABOUT THE SETTING SCREEN 4. [Network Settings] Menu ■■Static DHCP Enter MAC and static IP addresses to the DHCP server. LLYou can enter up to 32 entries. [Network Settings]-[DHCP Server] Static DHCP Enter the MAC and IP addresses, and then click . LLMake sure that the addresses of the devices on the network do not overlap or conflict. If a DHCP server is already connected to the network, and there is an address conflict, a network problem will occur. See the Troubleshooting section for possible solutions. ■■Static DHCP Table Displays the static DHCP entries.
4
ABOUT THE SETTING SCREEN
4-14
4. [Network Settings] Menu
[Network Settings]–[DHCP Server]
■
Static DHCP
Enter MAC and static IP addresses to the DHCP server.
L
You can enter up to 32 entries.
Static DHCP ��������
Enter the MAC and IP addresses, and then click <Add>.
L
Make sure that the addresses of the devices on the network do not overlap
or
conflict.
If a DHCP server is already connected to the network, and there is
an address conflict, a network problem will occur.
See the Troubleshooting section for possible solutions.
■
Static DHCP Table
Displays the static DHCP entries.
<Delete> ���������
Click <Delete> to remove the entry.