Icom IP100H Instruction Manual ver. 2.30 - Page 197
the update was correctly done., After the firmware updating is finished
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
5 MAINTENANCE 7. How to update the firmware using a USB flash drive ■■Updating the firmware 8 All LEDs light orange while the firmware update is in progress. Note: NEVER remove the USB flash drive or turn OFF the IP1000C's power. Lights orange while updating the firmware. 9 When the update has been finished, the IP1000C automatically reboots. LLAfter rebooting, verify that [PWR] lights green, and then turn OFF the power. Note: NEVER remove the USB flash drive while the IP1000C's power is ON. q Turn OFF the power w Remove the USB flash drive TIP: After the firmware updating is finished, check the firmware version on the setting screen to verify that the update was correctly done. 5-16
5
MAINTENANCE
5-16
7. How to update the firmware using a USB flash drive
■
Updating the firmware
All LEDs light orange while the firmware update is in progress.
Note: NEVER remove the USB flash drive or turn OFF the IP1000C’s power.
When the update has been finished, the IP1000C automatically reboots.
L
After rebooting, verify that [PWR] lights green, and then turn OFF the power.
Note: NEVER remove the USB flash drive while the IP1000C’s power is ON.
8
9
Lights orange while updating the firmware.
w
q
Remove the USB flash drive
Turn OFF the power
TIP:
After the firmware updating is finished, check the firmware version on the setting screen to verify that
the update was correctly done.