Icom IP100H Instruction Manual ver. 2.30 - Page 77
Telephone Gateway Interconnection
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
4 ABOUT THE SETTING SCREEN 7. [RoIP Server Settings] Menu [RoIP Server Settings]-[Telephone Gateway Interconnection] ■■Telephone Gateway Interconnection Set the Telephone Gateway Interconnection with a VE-PG3. 1 2 3 4 56 (This is only an example.) 1 No 2 Destination Address ��� 3 Destination Port Number � 4 Service Port Number �� 5
4
ABOUT THE SETTING SCREEN
4-23
7. [RoIP Server Settings] Menu
[RoIP Server Settings]–[Telephone Gateway Interconnection]
■
Telephone Gateway Interconnection
Set the Telephone Gateway Interconnection with a VE-PG3.
1
No. �����������
Select the number that is registered to a device.
L
Up to 20 devices can be registered.
2
Destination Address ���
Enter the destination device’s IP address or domain name. (Up to 63
characters)
3
Destination Port Number �
Enter the destination VE-PG3’s port number.
Range: ‘2’ to ‘65534’ (only even numbers)
L
The set port number (RTP) and the port number +1 (RTCP) are used for the
communication.
4
Service Port Number ��
Enter the port number for receiving audio signals.
Range: ‘2’ to ‘65534’ (only even numbers)
In±ormation
L
• The set port number (RTP) and the port number +1 (RTCP) are used for the
communication.
• This number is also used for the caller port number.
• Do not set the port number which has already been used by another
connection setting.
5
<Apply> ��������
Click to apply the entries.
6
<Reset> ��������
Click to restore the settings.
L
You cannot restore after clicking <Apply>.
(This is only an example.)
5
6
1
2
3
4