Icom IP100H Instruction Manual ver. 2.30 - Page 34
Bridge connection and Caller settings, About the IP1000C settings
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
2 SETTING UP THE IP1000C SYSTEM 3. Bridge connection and Caller settings When making a bridge connection with a VE-PG3*, the IP1000C system can communicate with the transceivers. * A VE-PG3 with a firmware version 1.13 or less cannot communicate with the IP1000C system. Before connecting the VE-PG3, check the firmware version on the VE-PG3's setting screen. Bridge connection Extension number 2001 IP1000C 192.168.0.1 IP100H Sales1 00001 Seles group1 00011 Wireless access point Sales2 00002 VE-PG3 (RoIP Gateway) 192.168.0.2 IP phone Extension number 500 About the IP1000C settings 1. Enter the IP address of the VE-PG3 in the [Telephone Gateway Interconnection] field. (Example: 192.168.0.2) [RoIP Server Settings] (menu) > [Telephone Gateway Interconnection] (screen) > [Telephone Gateway Interconnection] (field) This number is the same as the "Telephone Gateway Interconnection Number" item in the [Destination Setting] field. 2. After setting the "Call Type" item to "Telephone," select the "Telephone Gateway Interconnection Number" item and then enter a telephone number in the "Destination Phone Number" item. [Destination Settings] (menu) > [Destination Settings] (screen) > [Destination Setting] (field) ••Select the bridge number as same as the number that is selected the [Telephone Gateway Interconnection] field. (Example: 1) ••Enter the VE-PG3's extension number. (Example: 500) This number is the same as the "No." item in the [Telephone Gateway Interconnection Number] field. 3. After setting the "Call Type" item to "Telephone," enter the "Destination Phone Number" item. [Common Settings] (menu) > [ID List] (screen) > [ID List] (field) ••Enter the VE-PG3's extension number. (Example: 500) 2-15