Icom IP100H Instruction Manual ver. 2.30 - Page 94

4 ABOUT THE SETTING SCREEN 8. [Transceiver Settings] Menu ■■Transceiver Settings [Transceiver Settings]-[Transceiver Settings] 6 7 8 9 10 11 (This is only an example.) 7 Use ID List (Address) key Select whether or not the IP100H uses the ID list. (Default: Disable) •• Disable The call type is fixed to that which is selected in the "Call Type" item, as below, even if you push the [ ] key on the IP100H. LLIf you set the Call Type to "Individual" or "Group," enter the destination ID (00001 ~ 60000) in the "Destination ID" item. (Default: All) 8 Add All Call to ID List �� LLEven if "Disable" is selected, the IP100H displays a received ID in the ID list. •• Enable The call type is changed by pushing the [ ] key on the IP100H. Select First Call ID from All or an ID number (1 to 50) that is displayed when the IP100H is turned ON, and the Call type. LLThe ID list is selected on the Common Setting screen. Select whether or not to display All Call in the ID list of the IP100H.  (Default: Disable) •• Disable Does not display "All" in the ID list. LLWhen "Disable" is selected in the [Add All Call to ID List] item, you cannot select an All call using the [ ] key. •• Enable LLWhen the "User ID List" item (7) is set to "Enable," set the "Add All Call to ID List" and the"Startup Talkgroup" items. 4-40