Icom IP100H Instruction Manual ver. 2.30 - Page 31
About messages
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2 SETTING UP THE IP1000C SYSTEM 2. Transceiver settings ■■About messages Enter messages that the IP100H will transmit. After registration is finished, the IP100H needs to be rebooted. When using the Message, set the "Message" to "Enable." (p.4-45) 1 Click [Common Settings], then [Messages]. ••The [Messages] screen is displayed. 2 Select the message group number in the "Message Group" field. ••The message group number (example: 1) is used in the "Message List" item on the [Common Settings] screen. 3 Enter a message of up to 32 characters in the "Messages" field. Then click . ••Up to 10 messages can be registered in each group. q Enter w Click 2-12
2
SETTING UP THE IP1000C SYSTEM
2-12
2. Transceiver settings
■
About messages
Enter messages that the IP100H will transmit.
After registration is finished, the IP100H needs to be rebooted.
When using the Message, set the “Message” to “Enable.” (p.4-45)
Click [Common Settings], then [Messages].
• The [Messages] screen is displayed.
1
Select the message group number in the “Message Group” field.
• The message group number (example: 1) is used in the “Message List” item on the [Common Settings] screen.
2
Enter a message of up to 32 characters in the “Messages” field. Then click <Apply>.
• Up to 10 messages can be registered in each group.
3
q
Enter
w
Click