Icom IP100H Instruction Manual ver. 2.30 - Page 36
About the VE-PG3 settings Converter mode
![]() |
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2 SETTING UP THE IP1000C SYSTEM 3. Bridge connection and Caller settings Bridge connection Extension number 2001 IP1000C 192.168.0.1 IP100H Sales1 00001 Seles group1 00011 Wireless access point Sales2 00002 VE-PG3 (RoIP Gateway) 192.168.0.2 IP phone Extension number 500 About the VE-PG3 settings (Converter mode) 1. Enter the IP address of the IP1000C in the [Bridge Connection] field. (Example: 192.168.0.1) Select the Voice Cording. (Example: G.711u Signaling) [Port Settings] (menu) > [Bridge] (screen) (Example: Bridge1) > [Bridge Connection] (field) LLMake sure the using port number for connection do not duplicate with another connection. 2. Select the call type and enter the destination ID in the [Bridge Communication] field. Call type (Example: Group), Destination ID (Example: 11) 3. For full-duplex telephone operation, set the "Priority Receive" item in the [Bridge Control] field to "Disable." 4. Click at bottom of the screen. Then click in the [Bridge Connection] field. ••The "Connection Status" item changes form "Not Connected" to "During Transmit." After settings in this screen are completed, click . Then click . "Default Callee ID" item is set to "Enable," set the Destination settings below. Set the PTT control or Call Control types according to your requirements. 2-17
![](/manual_guide/products/icom-ip100h-instruction-manual-ver-230-404a6b9/36.png)