Icom IP100H Instruction Manual ver. 2.30 - Page 9
Rear panel, CONSOLE] port, LAN] ports
![]() |
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
1 BEFORE USING THE IP1000C 1. Panel description ■■Rear panel 1 1 [CONSOLE] port (RJ-11 type 2 [LAN] ports (RJ-45 type×4 2 3 45 Connect an RS-232C serial communication interface to externally configure the IP1000C. (Optional OPC-1402A is required.) Connect the network devices such as a HUB. [LED indication] qw Lights: LAN connected Blinks: LAN data communicating q Green: 1000BASE-T w Orange: 10BASE-T/100BASE-TX 3 [INIT] button 4 DC jack 5 Ground terminal If you forget its IP address and you cannot access to the IP1000C setting screen, you can initialize (reset) the IP1000C by pushing [INIT] on the rear panel. (p. 5-4) •• See the "PRECAUTIONS" leaflet for details. •• Initializing resets all settings to the factory defaults. Connect the supplied power adapter. Connect to the ground. 1-4
![](/manual_guide/products/icom-ip100h-instruction-manual-ver-230-404a6b9/9.png)