Icom IP100H Instruction Manual ver. 2.30 - Page 122

4 ABOUT THE SETTING SCREEN 9. [Common Settings] Menu [Common Settings]-[Wireless LAN] ■■Wireless LAN Registers wireless LAN settings that are commonly used by the IP100Hs. LLYou can individually set the common settings to each registered group in the "Common Setting List" field on the [Common Settings] screen. LLIf any setting in this screen has been changed, you must reboot the IP100Hs. 1 2 3 4 5 6 7 8 9 (This is only an example.) 1 No 2 Name 3 Scan Mode 4 Power Level 5 Roaming Threshold ��� 10 11 Select a group number between 1 and 20 to assign to the IP100Hs. Up to 20 groups can be registered. Enter a Group name of up to 31 characters. Select the frequency band that the IP100H uses. (Default: M✔ 11g, M✔11a) Selecting "11g" includes "11b." LLAccess points that comply with the wireless LAN standards, can be used with the IP100H. Set the IP100H transmit power level to between High, Middle and Low.  (Default: High) LLWhen "High" is selected, the transmission distance of the IP100H is maximum. Or when selecting a lower level, the distance will be reduced. Set the received signal strength level when the IP100H starts roaming. The selectable level is between -1 and -100 dBm. (Default: -75 (dBm)) LLWhen setting to high level (example: -50 dBm), it becomes easy to start roaming. Or when setting to low level (example: -90 dBm), it becomes difficult to start roaming. 4-68