Icom IP100H Instruction Manual ver. 2.30 - Page 81
Link Setting
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
4 ABOUT THE SETTING SCREEN 7. [RoIP Server Settings] Menu [RoIP Server Settings]-[Additional Controller Link] ■■Link Setting This is a setting to link with other IP1000Cs, VE-PG3s (Bridge mode), or VE-PG4s. 1 2 3 4 56 (This is only an example.) 1 No 2 Name 3 Destination Address ��� 4 Destination Port Number � 5
4
ABOUT THE SETTING SCREEN
4-27
7. [RoIP Server Settings] Menu
[RoIP Server Settings]–[Additional Controller Link]
■
Link Setting
This is a setting to link with other IP1000Cs, VE-PG3s (Bridge mode), or VE-PG4s.
1
No. �����������
Select a number between 1 and 100 to register the other transceiver
controllers.
L
Up to 100 links can be made.
2
Name ����������
Enter the group name. (Up to 31 characters)
3
Destination Address ���
Enter the destination device’s IP address or domain name. (Up to 63
characters)
4
Destination Port Number �
Enter the destination controller’s service port number of the Additional
Controller Settings (p. 4-17).
Range: “2” to “65534” (only even numbers)
L
The set port number (RTP) and the port number +1 (RTCP) are used for the
communication.
5
<Apply> ��������
Click to apply the entries.
6
<Reset> ��������
Click to restore the settings.
L
You cannot restore after clicking <Apply>.
(This is only an example.)
1
5
6
2
3
4