Icom IP100H Instruction Manual ver. 2.30 - Page 47

2 SETTING UP THE IP1000C SYSTEM 5. Additional controller link with VE-PG3 IP100H makes a Group Call with the Additional Controller Link (VE-PG3) IP1000C Additional Controller Link Controller connection 192.168.0.2 (Area A) 192.168.0.3 (Area B) IP100H Sales31 00031 VE-PG3 (RoIP Gateway) [USB] [D-TRX1] P0 P1 P2 P3 P4 192.168.0.11 CT-24 Sales group3 00301 Sales32 00032 Port number (Controller 1): 21500 Port number (D-TRX1): 21502 Repeater A Transceiver About the VE-PG3 settings (Bridge mode) 2. After selecting the "Port Type" item to "Digital Transceiver 1 (D-TRX1)" in the [Bridge Connection Point] field, enter the IP address of the VE-PG3. (Example: 192.168.0.2) Enter the Connection Port Number. (Example: 21500) Enter the "My Station Port Number" same as the Connection Port number of the Controller 1. (Example: 21502) Select the Voice Cording. (Example: AMBE+2) [Bridge Connection] (menu) > [Bridge Connection] (screen) > [Bridge Connection Point] (field) LLMake sure the using port number for connection do not duplicate with another connection. 3. After selecting the "Port Type" item to "Controller 1" in the [Bridge Connection Point] field, enter the IP address of the VE-PG3. (Example: 192.168.0.2) Enter the Connection Port Number. (Example: 21502) Enter the "My Station Port Number" same as the Connection Port number of the Digital Transceiver 1 (D-TRX1). (Example: 21500) Select the Voice Cording. (Example: AMBE+2) [Bridge Connection] (menu) > [Bridge Connection] (screen) > [Bridge Connection Point] (field) LLMake sure the using port number for connection do not duplicate with another connection. 2-28