Icom IP100H Instruction Manual ver. 2.30 - Page 17

1 BEFORE USING THE IP1000C 2. Feature description ■■Area Call This function is used when operating by limiting to a certain area. (Default: Disable) If you make an All Call or Group Call when Area Call in the IP100H is set to ON, the IP100H and IP100FS that are in the same area with the IP100H connected to the wireless access point are called. IP100H makes an All Call with the Area Call function IP1000C Sales All Call Accounts IP100FS calls the All Call with the Area Call function Parts Wireless access point IP100H The wireless access points that the IP100H is included in with the Area Call function, are set on the [Area Call] screen in the [RoIP Server Settings] menu. (Example: For Sales and For Accounts) When the IP100FS uses the Area Call function, can call IP100Hs that are in the communication range of the access points assigned to the Area Call. Select the access point in the [Location], the Call type (Individual, Group, All, Area or Telephone) and names are displayed To use Area Call, it is required to enable the [Area Call] for each IP100H in the [Transceiver Settings] screen, and then register the area's wireless access point (BSSID) in the [Area Entry List]. 1-12