Icom IP100H Instruction Manual ver. 2.30 - Page 93
Enable, The Destination ID Call type is displayed on the standby mode.
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
4 ABOUT THE SETTING SCREEN 8. [Transceiver Settings] Menu ■■Transceiver Settings [Transceiver Settings]-[Transceiver Settings] 6 7 8 9 10 11 (This is only an example.) 6 PTT Call at Stand-by ��� Select whether the IP100H displays the Destination ID (Call type) in the standby mode or not. (Default: Enable) •• Enable The Destination ID (Call type) is displayed on the standby mode. LLWhen the PTT on the IP100H is pushed, the IP100H calls the displayed ID (Call type). •• Disable The Destination ID (Call type) is not displayed on the standby mode. LLThe Destination ID (Call type) is displayed when you select the ID using function keys. 4-39
4
ABOUT THE SETTING SCREEN
4-39
8. [Transceiver Settings] Menu
[Transceiver Settings]–[Transceiver Settings]
■
Transceiver Settings
6
PTT Call at Stand-by ���
Select whether the IP100H displays the Destination ID (Call type) in the
standby mode or not. (Default: Enable)
•
Enable
The Destination ID (Call type) is displayed on the standby mode.
L
When the PTT on the IP100H is pushed, the IP100H calls the displayed ID
(Call type).
• Disable
The Destination ID (Call type) is not displayed on the standby mode.
L
The Destination ID (Call type) is displayed when you select the ID using
function keys.
6
7
8
9
*
+
(This is only an example.)