Icom IP100H Instruction Manual ver. 2.30 - Page 194
Loading the settings from the USB flash drive
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
5 MAINTENANCE 6. How to restore the configuration using a USB flash drive ■■Loading the settings from the USB flash drive 1 Remove the USB flash drive from the PC appropriately. 2 Prepare the IP1000C to load the settings. 3 Turn OFF the power. Note: Turn OFF the IP1000C's power, before inserting the USB flash drive. 4 Insert the USB flash drive, that contains the setting data (savedata.sav), into a [USB] port, and then turn ON the power. LLWhile setting data, the [USB] LED alternately blinks orange and green. w Turn ON the power q Insert the USB flash drive Alternately blinks orange and green while accessing the device. Note: NEVER remove the USB flash drive or turn OFF the IP1000C's power, while setting data. It will cause data corruption, or damage the USB flash drive. 5-13