Icom IP100H Instruction Manual ver. 2.30 - Page 139
Registration Retry Interval, Default: Tone 1
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
4 ABOUT THE SETTING SCREEN 9. [Common Settings] Menu ■■ Profile [Common Settings]-[Profile] 6 7 8 9 10 11 (This is only an example.) 6 Controller IP Address Notify Enter the IP address of the server to connect to the IP100H. 7 Registration Interval ��� Enter the transmit interval for the registration information that the IP100Hs will use. (Default: 60 (seconds)) LLGenerally use the default setting. LLWhen the interval period is short, and an IP100H goes out of the communication area, the IP100H registration on the IP1000C can be updated earlier. Therefore, if the IP100H receives an Individual call, the IP1000C can quickly reply "No response" as a Target availability check. 8 Registration Retry Interval (If failed Enter a retry interval when the IP100H fails to register to the IP1000C, between 1 and 30 seconds. (Default: 10 (seconds)) 9 Number of Registration Retries (If failed Enter a number of registration retries if the IP100H fails to register to the IP1000C, between 1 and 10. (Default: 2) 10 Expire Time The IP1000C check the IP100Hs connection status in this interval. (Default: 180) LLSetable range is Registration Interval (7)+ 1 to 900 (seconds). LLGenerally use the default setting. LLYou cannot set this setting to shorter than Registration Interval (7). 11 Calling Notice Tone ��� Select a notice tone for calling. (Default: Tone 1) LLThis tone can be individually assigned to each call type, "Individual Call," "Group Call," "All Call" and "Telephone." LLYou can select "Not Use" or "Tone 1" to "Tone 8." 4-85