Icom IP100H Instruction Manual ver. 2.30 - Page 32
About the status settings
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
2 SETTING UP THE IP1000C SYSTEM 2. Transceiver settings ■■About the status settings Enter the status that the IP100H will transmit. After registration is finished, the IP100H needs to be rebooted. When using the Status, set the "Status" to "Enable." (p.4-46) 1 Click [Common Settings], then [Status]. ••The [Status] screen is displayed. 2 Enter a status of up to 32 characters in the "Status Setting" field. Then click . LLUp to 10 statuses can be entered. LLThe items that are unchecked are not displayed on the IP100H. q Enter w Click 2-13
2
SETTING UP THE IP1000C SYSTEM
2-13
2. Transceiver settings
■
About the status settings
Enter the status that the IP100H will transmit.
After registration is finished, the IP100H needs to be rebooted.
When using the Status, set the “Status” to “Enable.” (p.4-46)
Click [Common Settings], then [Status].
• The [Status] screen is displayed.
1
Enter a status of up to 32 characters in the “Status Setting” field. Then click <Apply>.
L
Up to 10 statuses can be entered.
L
The items that are unchecked are not displayed on the IP100H.
2
q
Enter
w
Click