Icom IP100H Instruction Manual ver. 2.30 - Page 173
Traceroute Test, Information
View all Icom IP100H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
4 ABOUT THE SETTING SCREEN 11. [Management] Menu ■■Traceroute Test Run the Traceroute test. [Management]-[Network Test] 1 2 3 4 5 1 Node 2 Max Hop Count 3 Timeout 4 DNS Lookup 5
4
ABOUT THE SETTING SCREEN
4-119
11. [Management] Menu
[Management]–[Network Test]
■
Traceroute Test
Run the Traceroute test.
1
2
3
4
5
1
Node ����������
Enter the node’s (device’s) IP address.
2
Max Hop Count �����
Select the maximum hop number.
(Default: 16)
3
Timeout���������
Select the response time.
(Default: 3)
Note: If there is no response within the selected time, a time out error is
returned.
4
DNS Lookup ������
Select “Enable” to convert the node’s (device’s) IP address into the host
name. (DNS name resolution)
(Default: Enable)
5
<Traceroute> ������
Click to run the traceroute test.
Information
L
• The test result is displayed as shown below.
(This is only an example.)
•
Click to save the result to a PC as a text file (extension: “txt”).
•
The file is saved as “tracert_
node’s address
.txt.”
• Click <Back> to return to the Traceroute Test screen.